Biocair announces event to advise on building a resilient supply chain
Biocair is aiming to educate Contract Manufacturing Organisations (CMOs) and pharmaceutical sponsors on the value of lane risk assessments ahead of shipping Active Pharmaceutical Ingredients (APIs) and finished drug products globally.
InferSens to introduce Ultra-Low-Power Edge DL Sensor Technology for commercial and industrial applications
InferSens introduces Ultra-Low-Power Edge DL Sensor Technology for commercial and industrial applications. Battery-Powered Sensor, with Embedded Syntiant NDP120 Neural Decision Processor, enables highly accurate on-device processing. InferSens CTO Jonathan Peace presented first application for Legionella Water System Monitoring at the tinyML EMEA Innovation Forum 2022 in Cyprus.
Sensors in Medicine 2022 - just 4 weeks away
The 10th Annual Sensors in Medicine 2022 conference takes place online from 8 - 11 November. Each session is held from 2:00pm to 6:00pm (GMT) daily. Technical sessions are on: Sweat analysis; Molecular sensors; Wearable sensors; Sensors for infectious diseases; the Future of Sensors.
Moisture measurement for Hydrogen and Natural Gas Blending
Michell Instruments: supporting the roll-out of net zero technologies
Altana Technologies lands $100m Series B to fund expansion
Signs agreements with UPS, Maersk, and U.S. Customs and Border Protection to power trusted supply networks.
Should you use workplace personality tests?
Are workplace personality tests a good thing or can they cause more trouble than they're worth? The HR Dept takes a deeper look into the benefits and pitfalls of personality testing.
Join the PrOPEL Hub People Management Hackathon - 28th Oct 2022
University of East Anglia have spaces for 25 businesses (two or three people per business) to take part in the day-long London in-person event on 28th October 2022.
Agri-tech innovation ecosystem embracing challenge with growth
Agri-Tech Week (7th-11th November 2022) showcases how farmer challenges are creating innovation opportunities that enhance competitive advantage.
Introducing Projection Micro Stereolithography (PµSL)
Prototype Projects says - we're really excited to make a BIG announcement about a new 3D Printing process that makes teeny tiny parts which are incredibly accurate. Introducing... Projection Micro Stereolithography, or PµSL, an exciting additive manufacturing technology for building parts that cannot be produced using other technologies such as conventional SLA, DLP, SLS or PolyJet.
lowRISC appoints Cybersecurity Expert Prof. Dr. Claudia Eckert to Board of Directors
Cambridge, United Kingdom – lowRISC C.I.C., the open source system on a chip (SoC) organization, announces the appointment of Prof. Dr. Claudia Eckert to its board of directors.
Guardtech Group take centre stage with Hello, Dolly! theatre show sponsorship
Suffolk-based cleanroom construction company continue support for charities and groups at home and abroad with Irving Stage Company backing.
Intellegens announces the Alchemite™ 2022 Autumn Release, focused on accelerating innovation in practice
CAMBRIDGE, UK – Intellegens announces the 2022 Autumn Release of its Alchemite™ machine learning software, focused on key practical tasks to accelerate innovation for chemicals, materials, and manufacturing.
Cresset's September 2022 Newsletter
Introducing Hit Expander and a sneak peek at Flare V6.1; molecular modeling to deliver corporate objectives
How far do you want to go with workplace wellbeing?
Calling managers and leaders of UK organisations (public, private and third sector organisations all welcome!) to give their opinions on workplace wellbeing initiatives.
Digital right to work checks – October deadline
Is your business ready for the change to right to work checks being implemented on the 1st October? Learn about the change, and what you need to do to prepare.
Networking - the benefits it provides
EFEC is proud to be a Cambridge Network member both because of the excellent services and impacts the Network has and because of our joint work in setting up the Lingang Cambridge Network.
What are the finishing options for vacuum cast parts?
Vacuum casting is used for concept models, functional prototypes, jigs and fixtures, and end-use parts, so the finish(es) must be selected carefully to suit the application. So, what are the finishing options?
cofinitive nominated for Community Champion award in British Chambers of Commerce ‘Chamber Business Award 2022’
cofinitive is thrilled to announce its been nominated for a British Chambers of Commerce (BCC) ‘Chamber Business Award 2022’ in ‘The Community Champion’ category.
Tom’s Trust moves headquarters across Cambridge in new partnership with Marshall Skills Academy
The children’s brain tumour charity, Tom’s Trust, has moved its headquarters to Newmarket Road in the east of Cambridge in a new partnership with Marshall Skills Academy.
How do you empower your teams? New cohort on Trust Works programme now open for registration
Are you wondering how to provide more autonomy to your teams and empower your workforce? And how this leads to improved results and better staff engagement? Then join Trust Works' Moving Towards Self-Management programme, the next cohort of which starts in November.
Up to £100k of investment available from BRAN with Allia’s new Accelerator Challenge
Allia is looking for impact start-ups across the UK that have innovative solutions for addressing some of the world’s most pressing issues such as cleantech, agetech, social inclusion and homelessness.
New research from Singular Talent reveals 52% of biotech employees want freedom from their boss
Specific research on the world of work in Biotech is hard to find.Moving forward: CleanCube Mobile Cleanrooms embrace the changing landscape
Guardtech’s award-winning portable controlled environments set to offer solutions for range of new applications
Knowledge from noise - new algorithm turns uncertainty into a positive for industrial R&D and beyond
A recently published paper in the prestigious journal Applied Intelligence introduces a novel method by which machine learning can extract valuable information from uncertainty or noise in input data.
CNC machined parts in three days. How do Prototype Projects Ltd do that?
Prototype Projects Ltd says: CNC machined metal and plastic parts are often key components in prototypes. Furthermore, CNC machining is a versatile and cost-effective way to manufacture end-use parts. With our customers under ever-increasing time pressure, we identified a need for a faster turnaround for CNC machined parts. Consequently, we invested in people and processes so we could offer an…